This page and the information below is only valid for Class 110220. Class date is Sunday, February 20, 2011. Please read the entire page as there is required equipment that you will need to bring.
We strive to return all phone calls and e-mails within 24 hours. Please ensure that you have provided the correct number and that the phone number does work. We strive to make your experience as smooth as possible.
In order to better serve you please go to our contact page and complete:
Minimum of 50 rounds per weapon fired. 50 rounds are required for testing and generally we like students to fire 10 warmup rounds prior to the test so 60 rounds is recommended, but this is optional.
Since we do allow re-testing, based on the student shooting safely, it is recommended to bring an additional 50 rounds.
Minimum of two (2) magazines (semi-auto) or quick loaders (revolver)
Ballistic Eye Protection
Hearing Protection
Company owned weapon or the weapons type you will be carrying on the job. For example if you qualify with a Glock 22 during the test you are able to carry any Glock 22 on duty.
Rigid belt holster (Please no shoulder holsters)
Note: If you do not have the required gear on the day of testing you will not be allowed on the range.
Ballistic Vest
Layered clothing
Thin Shooting Gloves
Wide brim hat for rain / sun and /or baseball cap
Snacks and Water (A break for lunch is in the plan, but some students prefer to skip lunch, students call)(No eating on the range)
Cleaning Equipment for you Handgun
Oil (We use the product Breakfree)
Instruction Booklet (for classroom use only). If you desire a copy one can be purchased for $15.00 which is the cost of copying and binding.
Test Material (for classroom use only)
Forms required to be filed with the Department of Licensing (copy provided to you)(you will submitted the forms to DOL)
Targets – one for practice dry / live and one for testing. The testing target remains with this Company after testing.
Pens & Paper Instruction Materials
Red Gun (Glock 17) for instruction
Range (+fees) and Classroom (rental and fees)
Inert Rounds (we have inert rounds for .45, 9mm, & .40cal. If you have another caliber please let us know in advance so we may obtain the proper inert round)
For more information and to view the complete range test please go to CJTC website and look for Form 729 or click this link (opens into a new window). There are additional test items, which involve loading and unloading and misfire procedures. We will walk you through each one of these prior to the testing.
Prior knowledge of Firearm safety, weapons handling, and accurate shooting are a requirement for this session.
Practice drawing your weapons and holstering it. (Unloaded)
Practice reloading with your eyes up and being situational aware.
Ensure that your finger stays off the trigger until you are ready to fire.
Please remember this is a class on Washington State Firearm licensing and Washington State Weapons Qualification. No hands-on weapons training is conducted. We do however allow two attempts to qualify and allow warm-up time.
Students generally have the hardest time shooting at 25 yards. We strongly encourage you to practice shooting at 25 yards several times prior to this class. We want you to pass this test!
If you require additional training we also provide that: Firearms Training
Although we do not like last minute changes to our schedule, and we know you don't either, we do reserve the right to cancel any class in the event of an emergency. Of course, refunds will be issued. Please know that we will always do our best to accommodate you.
The firing range is outdoors so please dress appropriately for the weather. In December 2009 the range was closed due to extreme cold conditions make it unsafe to fire. This is an unusual situation here in Washington, but if this does occur we will reschedule your class at no additional cost to you. Weather is not generally an issue here in Western Washington with regards to firing outdoors.
You must sign a liability waiver. It is a standard waiver, but please read it so that if you have questions you research the answers.
You must submit all the necessary paperwork to CJTC for your handgun certification. The Hamblen Group is not involved in that process as per the direction by CJTC.
Step 1 First and most importantly, make a copy of all paperwork before you submit it. We cannot stress this strongly enough.
Step 2 Complete all the necessary paperwork required by both the DOL and CJTC.
Step 3 Complete Form 726 (which is NOT provided by us).
Step 4 Mail the originals of Forms 729, 731. You received the original and only copy after completing your handgun certification. We do not keep a copy. Include Form 726.
Step 5 Submit the required fees for CJTC, currently it is $100. Ensure that you provide CJTC your correct e-mail address as this is how they send you the certificate. RECHECK your email address.
Privileged/Confidential information may be contained in this electronic link and on this page. The information is intended for the use of the Bailbonds Handgun Class Participates. If you have received this electronic link in error, please immediately notify us by telephone at 206-450-8218. You are cautioned that any disclosure, copying, distribution, or other use of this page and information is strictly prohibited.